Fenix GL07 Weapon Light

Pistol LED flashlight Fenix GL07 is designed specifically for short weapons. It offers maximum light output 700 lumens with afterglow up to 240 meters. The lamp is powered by one Li-ion battery. Fenix ARB-L16-800UP, which is recharged with modern USB-C connector on its side (battery and cable are included in the package). If necessary, it is also possible to use disposable lithium battery CR123A. The light control is fully ambidextrous, ideal for both right- and left-handed users. Mounting on a weapon rail is lightning fast and requires no tools – the light is easily inserted and secured thanks to the quick-release mechanism. It can be attached to Picatinny MIL-STD-1913 and GLOCK standard weapon rails (does not fit slimline weapons, e.g. Glock 30 model). Fits service weapons of the Czech Police (CZ 75D).

Its great advantage is modular sliding rail, which ensures that the light can be moved forward and backward to lock in the best position on the weapon. This guarantees wide compatibility with various weapon models. The light is therefore suitable for professionals, sports and hobby shooters as well as airsoft.

All parameters of the luminaire (luminous flux, battery operating time, waterproofness, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix GL07 pistol flashlight parameters

• Premium is used LED Luminus SFT-12R with a lifespan of 50,000 hours.
• Lighting modes:
  • With the Fenix ARB-L16-800UP battery: 700 lumens (1 hour) -> strobe.
  • With a single CR123A battery: 180 lumens (5.5 hours) -> strobe.
• TIR optics create a light cone with afterglow 240 meters (12,000 cd) – measured using the supplied battery.
• Protection against reverse battery insertion and protection against excessive battery discharge.
• It uses one Fenix ARB-L16-800UP Li-ion battery (included) for power, alternatively other Li-ion RCR123A / 16340 batteries.
• Alternatively, it is possible to use one disposable CR123A lithium battery, but the flashlight has a reduced output of 180 lumens.
• Dimensions 6.63 cm x 2.82 cm x 3.16 cm.
• Compatible with Picatinny MIL-STD-1913 and GLOCK standard weapon rails.
• Weight 74 grams (including battery).
• Intelligent overheating protection.
• The lamp body is made of hardened aircraft aluminum.
• Durable, hard-to-scratch surface – Type III hard anodized.
• Shockproof by falling from a height of 1 meter.
• Trapezoidal threads highly resistant to wear.
• Waterproof according to IPX7 standard (tested underwater at a depth of 1 meter).
• The package includes a Fenix ARB-L16-800UP battery, a USB-C charging cable, a latch for mounting on a Picatinny rail (the latch for GLOCK is already pre-installed on the flashlight), a spare o-ring, and instructions.

Fenix GL07 flashlight control

Important notice

ALWAYS FOLLOW THE OPERATING INSTRUCTIONS AND SAFETY PRINCIPLES WHEN HANDLING THE GL07 LIGHT.

From the factory, there may be a battery inside the lamp insulating cap. Before using it for the first time, remove the battery remove.

One click on any of the light switches turn on/off.

For immediate activation Press and hold any switch. The light will stay on while you hold it, and will turn off again when you release the switch.

Strobe activation – Pressing both switches simultaneously will activate the strobe. The strobe can also be activated by pressing and holding one of the switches and clicking the other switch. Pressing either switch again will exit the instant strobe mode, or pressing both switches simultaneously will return to the last used output.

Battery replacement – Unscrew the lamp head and insert the battery with the positive pole (+) facing the lamp head, then screw the head back on.

Intelligent overheating protection – A large amount of heat accumulates when the light is used for a long time. When the light reaches a temperature of 55°C or higher, it will automatically reduce the output by a few lumens to reduce the temperature. When the temperature drops below 55°C, it will return to standard output.

Low battery warning – If the voltage of the rechargeable battery drops below the set level, the flashlight will automatically reduce power. If the battery voltage drops below 3V, the flashlight will flash three times every 2 minutes to remind you that the battery needs to be recharged or replaced.
Note: This feature is only active when using rechargeable batteries.

Warning

• Do not disassemble the sealed parts in the lamp head yourself, as this will void the warranty and may cause damage.
• Fenix recommends using only high-quality batteries.
• If you will not be using the flashlight for a long time, remove the battery.
• If the glass of the flashlight is dirty with smoke after shooting, try cleaning it with fine steel wool, or try using a gun cleaning paste.
• Prolonged use may cause the O-ring to wear out. To maintain a proper water seal, replace the ring with a spare one.
• Since gun maintenance requires the use of organic solvents, avoid contaminating key components of the flashlight. This could damage the flashlight and void the warranty.
• Regular cleaning of the electrical contacts ensures trouble-free operation of the lamp, as dirty contacts can cause the lamp to flicker, light intermittently or even not light at all for the following reasons:
  • The battery is discharged - replace or charge it.
  • The contacts inside the lamp are dirty - clean them with a cotton swab dipped in alcohol.

Warranty

Five-year warranty on the lamp. Two-year warranty on the battery.