Nabíjateľná lucerna Fenix CL26R PRO – olivová

Fenix CL26R PRO is a practical portable rechargeable lantern that you can use to illuminate a room, tent, campsite, caravan, cottage, boat or work desk. In addition, it has a function power banks, so it can be used to charge other USB devices. The lantern offers a circular lighting function and bottom lighting, the individual lighting modes are switched by a rotary control. In addition, both lighting modes can be combined to achieve a total output of up to 650 lumens.

The CL26R PRO is powered Li-ion battery type 21700 with a capacity of 5000 mAh (part of the package), which is charged directly in the lantern using the USB-C connector and supplies energy up to 408 hours operation in the lowest mode. There is also a red light that does not interfere with the eyes' adaptation to the dark.

Front unidirectional lighting and bottom lighting are very practical features significantly energy-saving. They are particularly suitable in situations where circular omnidirectional lighting is not required.

Thanks to the durable and impact-resistant construction with cover IP66 The lantern can be used safely even in bad weather (heavy rain). The top of the lantern is equipped with a hanging eye that can be opened like a carabiner and a strong neodymium magnet. magnet, so it can be easily hung or fixed to anything iron. Thanks to its compact dimensions, the lantern is particularly suitable for camping and hiking, but you can also use it in a caravan, on a boat or at a cottage.

All parameters of the luminaire (luminous flux, battery operating time, waterproofness, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Parameters of the Fenix CL26R PRO rechargeable lantern

• The light source is high-bright SMD diodes and red LEDs.
• Six ring lighting modes: 500 lumens (10 hours) -> 200 lumens (13 hours) -> 50 lumens (40 hours) -> 25 lumens steady light (67 hours) -> 3 lumens red light (125 hours) -> 3 lumens red flashing light (240 hours)
• Three bottom light modes: 150 lumens (15 hours) -> 50 lumens (58 hours) -> 5 lumens (408 hours) .
• The ring and bottom lighting modes can be combined to achieve a total output of up to 650 lumens.
• Electronics with extended light duration function and protection against reverse battery insertion.
• It is powered by 1x Li-ion 21700 battery with a capacity of 5000 mAh (included), any 21700 battery from our offer can be used as a replacement.
• Charging via USB-C connector.
• Function power banks with an output USB-A connector for charging other portable electronics with USB charging.
• Made of durable plastic, the lantern is shockproof to a drop from a height of 1 meter.
• Waterproof according to IP66 standard (sprayed with strong jets of water from all directions).
• The omnidirectional diffuser creates a wide, even light cone with a range of up to 15 meters.
• The top side is equipped with a hanging eye with a carabiner function and a neodymium magnet for attachment to anything iron.
• Dimensions 6 cm (diameter) x 6.6 cm (at the widest point including the controller) x 11.4 cm (height).
• Weight 272 grams (including battery), 199 grams (without battery).
• The package includes a lantern, a Fenix ARB-L21-5000 V2.0 battery, a spare o-ring, and a USB-C cable.
• It is also possible to purchase a USB power adapter and a USB car adapter for the lantern.

Use

From the factory, it may be inside the lantern on a battery insulating cap. Before using it for the first time, remove the battery remove.

Turning the switch clockwise will turns on the main circular light. Turning the switch counterclockwise will turns on the bottom light. Turning the switch in the selected direction switches the lighting modes of the switched on light. Turning the switch to the middle "off" position turns the lantern off again.

Combination of main and bottom light – The main and lower lights can be combined. Turn one of them on with the rotary switch to the desired power mode. The second light is then turned on by holding the electronic switch for 0.5 seconds, its modes can be further switched by pressing the button.

When the lantern is turned off, red light Turns on and off by holding the electronic switch for 0.5 seconds. Switches between red light modes by pressing the button.

Battery charge status indication – after a short press of the button (the flashlight must be turned off), the LED charge status indicator above the switch is activated. Four lit LEDs mean that the battery is charged to 80-100%, three lit LEDs mean 60-80%, two LEDs mean 40-60%, one LED means 20-40% and one flashing LED means that the battery is charged to less than 20%.

Power bank function

Flip the dust cover and insert the USB cable into the USB Type A discharge port on the flashlight, then connect the other end of the cable to the USB device you want to charge. If the lantern is on, the power bank function will be activated automatically when the USB cable is plugged in. If it is off, press the electronic switch, the indicators will move from right to left to display the status. During discharge, it is not possible to use the highest power or combine the main and lower light modes. After charging is complete, be sure to seal the dust cover. If the battery voltage is too low, the power bank function will be turned off.

Charging the Fenix CL26R PRO lantern

To charge the lantern, lift off the rubber dust cover. Connect the lantern to a computer, USB wall adapter, or USB car adapter using the included USB-C cable. You can also use a standard mobile phone charger or power bank to charge it. The indicator LEDs above the switch flash during charging to show the charging progress. They will remain lit when charging is complete.

The battery does not suffer from a memory effect, so it can be recharged at any time and there is no need to wait until it is discharged. Charging a fully discharged battery takes approximately 3.5 hours (depending on the power of the charging source used).

While charging, the lantern can only be switched to 5, 25 and 50 lumen modes.

Warning

• Do not disassemble sealed parts yourself, this will void the warranty.
• If the light is flashing, not switching to higher power modes, or not turning on, it could be for one of the following reasons:
  • The battery is almost empty - charge it.
  • The electrical contacts are dirty - clean them with a cotton swab dipped in alcohol.
  • The battery cap is loose, tighten it.