Fenix CL27R Work Light and Lantern - Blue

Fenix CL27R is a multifunctional rechargeable lantern and light. In addition, it also works great as a rechargeable work light, a light for photographers or as a light for the home, tent or car. The high-brightness COB diode provides wide beam of light with power up to 1200 lumens (ANSI), the intensity and hue of which can be to regulate smoothly rotary controls. Also available is high beam reflector with power 800 lumens and afterglow 177 meters and red light. The high beam and wide beam are possible combine and gain power up to 1600 lumens. The CL27R is powered by a single Li-ion 21700 battery with a capacity of 5000 mAh (included in the package). The battery is charged directly in the lantern using the USB-C connector.

Thanks to its durable and impact-resistant construction with IP66 protection, the light can withstand adverse weather conditions and even a fall from a height of 1.5 meters. A wide range of mounting options is provided by 360° rotatable handle, further built-in magnets and also has tripod thread.

All parameters of the luminaire (luminous flux, battery operating time, waterproofness, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix CL27R rechargeable work light parameters

• It uses a COB LED with an adjustable light temperature range of 2700 to 6500 K and a red chip and one Luminus SST-20 LED, both with a lifespan of 50,000 hours.
• Power modes: 
  • Long and wide beam: 1600 lumens to 15 lumens with a runtime of 3.8–100 hours.
  • Wide cone: 1200 lumens to 10 lumens with a runtime of 4.3–170 hours.
  • Long-range beam: 800 lumens to 5 lumens with a runtime of 8–285 hours.
  • Red light: 10 lumens (72 hours) - flashing 10 lumens (144 hours).
• It uses one rechargeable high-capacity Li-ion battery 21700 with a capacity of 5000 mAh, which is included in the package.
• The range of the high beam is 177 meters (8233 cd), the wide beam is 53 meters (690 cd).
• Charging via USB-C connector, charging time 2.5 hours.
• Battery charge status indication and low voltage warning.
• The light has a memory for the setting color temperature wide spotlight and always turns on in the last set shade.
• Made of aluminum alloy and durable plastic, the lantern is shockproof to a fall from a height of 1.5 meters.
• Waterproof according to IP66 standard (heavy rain).
• The light is equipped with a handle with a thread for mounting on a tripod and an integrated magnet. The handle can be rotated 360°.
• Dimensions 10.9 cm x 9.2 cm x 3.9 cm.
• Weight 300 grams (including battery).
• The package includes a lantern, ARB-L21-5000 V2.0 battery, plastic key to release the battery cover, USB-C cable, spare o-ring.

 Using the Fenix CL27R Rechargeable Lantern

Turning on/off and changing the white light output – to switch on to white light mode, turn the left knob clockwise. By turning it, you can then continuously regulate the light output from the lowest to the highest. To reduce the output, turn the left knob counterclockwise. To switch off, turn the left knob counterclockwise to the extreme position.

Switching lighting modes – turn on the lantern with the left control clockwise, it will always turn on in wide cone mode. Then, by pressing the top button, you can cycle between the lighting modes in the order wide cone – long cone – long and wide cone.

Changing the light shade of the wide spotlight – when the lantern is switched on in wide or combined beam, the shade of the white light of the wide beam can be continuously changed by turning the right knob in the range of 2700 to 6500 K. The shade of the far beam light is 5700 K and cannot be changed. The lantern remembers the set shade of the wide beam light even after switching off.

Red light – when the lantern is off, the red light is turned on and off by holding the electronic switch for 0.5 s. Further presses of the button cycle the red light between modes.

Battery replacement – using the plastic key provided, loosen the battery cap by turning it counterclockwise. Insert the battery with the positive pole facing the inside of the lantern and then tighten the cap completely again. Warning: unscrewing the battery cap with a sharp tool may scratch it.

Battery charge status indication – after a short press of the button or after turning on the lantern, the LED charge status indicator is activated for 3 seconds. Four lit LEDs mean that the battery is charged to 80-100%, three lit LEDs mean 60-80%, two LEDs mean 40-60%, one LED means 20-40% and one flashing LED means that the battery is charged to less than 20%.

Low battery warning – If the battery voltage drops below the set level, the lantern will automatically switch to a lower mode until it reaches the lowest power. When the low power is reached, the battery charge status indicator will start flashing to remind you to recharge or replace the battery.

Charging the Fenix CL27R lantern

Flip off the dust cap and plug the USB-C charging cable into the lantern's charging port. Replace the dust cap when charging is complete. The typical charging time is 2.5 hours for a completely discharged lantern. The indicators flash from left to right during charging, and all four lights will remain on when fully charged. The light can be used while charging.

Warning

• Do not disassemble sealed parts yourself, this will void the warranty.
• Remove the battery from the flashlight if you will not be using it for an extended period of time, or loosen the battery cap by half a turn.
• Regular cleaning of the electrical contacts ensures trouble-free operation of the lamp, as dirty contacts can cause the lamp to flicker, light intermittently or even not light at all for the following reasons:
  • The battery is discharged. Charge it or replace it with a charged one.
  • The electrical contacts inside the lamp are dirty, clean them with a cotton swab dipped in alcohol.

Warranty

Five-year warranty on the lamp, two years on the battery.