Fenix TK30R Rechargeable Laser Flashlight

Rechargeable laser flashlight Fenix TK30R It is one of the longest-range tactical flashlights on the market. Its white laser light creates an extremely focused beam that can reach up to a distance of 1500 meters and the luminous flux is up to 500 lumens (ANSI). The light source is white laser with LEP technology (laser excited phosphor), which is known for its use primarily in the automotive industry in the most luxurious vehicles. It is powered by one 21700 Li-ion battery with a capacity of 6000mAh (included), which is charged via the USB-C connector directly in the lamp. The charging socket is covered with a screw nut, so it is perfectly protected against water and dirt. The lamp is fully waterproof and dustproof according to the IP68 standard (tested underwater at a depth of 2 meters). The TK30R has two levels of white light power with a duration of almost 9 hours and a strobe flash is also available. The lamp uses a tactical switch with a rotary selector, which can be selected between high or low power and locking. The lamp can be can also be switched directly into strobe mode. The light flux is concentrated into a narrow cone, which means that all the light falls on a specific target, making the flashlight ideal for hunting and illuminating distant targets.

All parameters of the luminaire (luminous flux, battery operating time, waterproofness, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix TK30R flashlight parameters

• A white laser with LEP (laser excited phosphor) technology is used with a lifespan of 50,000 hours.
• Three lighting modes: 500 lumens (3.5 hours) -> 100 lumens (8.8 hours) -> Strobe 500 lumens.
• Special optics for a light cone with afterglow 1500 meters (600,000 cd).
• Electronics with digital power regulation, protection against reverse battery insertion and protection against excessive battery discharge.
• It is powered by one 21700 6000 mAh Li-ion battery (included).
• Dimensions 18.4 cm (length) x 4 cm (head diameter) x 2.54 cm (body diameter).
• Intelligent overheating protection.
• The lamp body is made of hardened aircraft aluminum type A6061-T6.
• Durable, scratch-resistant surface – Type III hard anodized.
• Shockproof against a drop from a height of 1 meter.
• Trapezoidal threads highly resistant to wear.
• Weight 250 grams (including battery).
• Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 meters).
• Tempered ultra-clear glass lens with anti-reflective coating.
• Battery placed between two springs – It easily withstands recoil when used on a weapon.
• Tactical switch at the end of the flashlight (direct strobe function by holding the button).
• Rotary switch for selecting between high and low power and control lock.
• The flashlight comes with an ARB-L21-6000 battery, a USB-C charging cable, a wrist strap, a belt holster, and a spare O-ring.
• Optional accessories include: AER-05 cable switch, AOT-L red traffic cone, AOF-L red filter.
• The following accessories are also compatible with the flashlight: ALG-00 quick-release rail mount, ALG-15 quick-release rail mount, Fenix ALG-16 M-LOK mount, Fenix ALG-18 barrel mount, metal magnetic barrel mount, plastic magnetic barrel mount, flashlight mount for optics, metal optic mount.
• It is also possible to purchase a USB power adapter and a USB car adapter for the lamp.

Fenix TK30R flashlight control

From the factory, there may be a battery inside the lamp insulating cap. Before using it for the first time, remove the battery remove.

Switching on when the lamp is unlocked: Hold the tactical switch at the end of the flashlight for a silent momentary light on, release to turn the light off. Fully press the tactical switch for a permanent on/off.

Switching on when the lamp is locked: Turn the switch from the Lock position to the low or high power position to turn on the light.

Power selection: Turn the switch on the end cap to choose between the Lock positions <-> Low <-> High and select the desired power or lock (and turn off) the lamp.

Strobe activation: On an unlocked flashlight, fully press the tactical switch for 0.5 seconds to turn on the strobe. Briefly press the tactical switch again to return to steady light.

Battery charge status indication – the charge indicator is hidden under the protective nut of the charging connector for tactical reasons, so it is necessary to unscrew the nut to check it. The flashlight always indicates the battery charge level three seconds after switching on. Green indicates a sufficient charge level (100% – 85%), green flashing (85% – 50%), constant red light (50% – 25%) and flashing red indicates a critically discharged battery (25% – 1%). If the battery is discharged, the flashlight will gradually start to automatically switch to lower power modes.

Charging the lamp – Unscrew the protective nut under the head of the lamp and connect it to a computer, a USB mains adapter or a USB car adapter using the included USB-C cable (not included). You can also use any mobile phone charger with a USB-C connector for charging. During charging, the indicator LED opposite the charging connector lights up red, and when fully charged, it lights up green. Charging a fully discharged battery takes about 3.5 hours. The Li-ion battery used does not suffer from a memory effect, so the lamp can be recharged at any time. The lamp cannot be turned on while charging.

Intelligent overheating protection – if the temperature of the lamp rises above 60 °C, it will automatically start to reduce the power in gradual steps.

 Warning

• Use only high-quality rechargeable Li-ion batteries of the 21700 type with protective electronics.
• Insert the battery with the positive pole facing the head of the lamp.
• If the protective rubber rings appear damaged after a long period of use, replace them. The rings should also be lubricated to prevent erosion of the rubber. Following these rules will ensure that the lamp is properly protected against water.
• If the light is flashing, not switching to higher power modes, or not turning on, it could be for one of the following reasons:
  • The battery is almost empty - charge it or replace it.
  • The contacts inside the lamp are dirty - clean them with a cotton swab dipped in alcohol.
  • The head, body or back of the lamp are loose, tighten them.