Nabíjateľná baterka Fenix E06R – šedá

Fenix E06R is a larger variant of successful miniature rechargeable flashlight Fenix E03R V2.0. Compared to it, it not only has higher performance, but also ultraviolet light and a laser pointer. Despite its compact dimensions and weight of only 54 grams offers a high luminous flux of up to 700 lumens (ANSI). The light cone evenly illuminates a wide area up to a distance 110 meters. The power supply is provided by an integrated battery with a capacity of 750 mAh, which is charged via modern USB-C connector on the side of the lamp. There are a total of four white light modes available, UV light with a wavelength of 365 nm with a power of 580 mW, red laser (indicator ≤0.39 mW) and several so-called modes. Breathing light – lights around the switch button with a power of 0.5 to 1 lumen, which you can use for discreet signaling or identification of the location of the flashlight. The flashlight comes with a sturdy clip, so you can attach it to a pocket, backpack strap or cap peak and release it when your hand is illuminated. Thanks to the magnet in the base of the flashlight, you can attach it to anything iron. The battery charge indicator in the button is also practical. This pocket flashlight is great for EDC and thanks to its small size, flat shape and weight, you can always have it with you.

All parameters of the luminaire (luminous flux, battery operating time, waterproofness, impact resistance and afterglow) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix E06R flashlight parameters

• Two white Luminus SST-12 LEDs, a 365 nm Luminus SST-08 UV diode and a Class 1 red laser are used, all with a lifespan of 50,000 hours.
• Four white light modes: 700 lumens (1.3 hours) -> 150 lumens (2.8 hours) -> 30 lumens (12 hours) -> 5 lumens (60 hours).
• UV light: 580 mW / 365 nm.
• Red laser (pointer): ≤0.39 mW.
• Pulsating light around the power button (Breathing light): red flashing, blue flashing, red and blue pulsing at 1 lumen and RGB pulsing at 0.5 lumen.
• The flashlight is powered by a built-in rechargeable battery with a capacity of 750 mAh.
• Battery charge status indication in the button.
• Charging via a modern USB-C connector, which is waterproof on the inside.
• Memory for the last set white light power mode.
• Intelligent overheating protection.
• Clip for attaching to a backpack strap, pocket, cap peak, etc.
• CNC milled aluminum alloy body with Type III hard anodized anti-scratch finish.
• Dimensions 6.9 cm (length) x 2.9 cm (width) x 1.6 cm (height).
• Range 110 meters (3100 cd).
• Weight 54 grams (including battery).
• Waterproof according to IP66 standard (sprayed with strong jets of water from all directions).
• Shockproof against a drop from a height of 1 meter.
• The package includes a key ring, a hand strap, and a USB-C charging cable.
• It is possible to purchase a micro-USB to USB-C adapter.

Use

To turn the white light on or off Hold the main button for approximately 0.5 seconds. You can switch power modes at any time during operation by pressing the button. To turn on the Breathing light, turn off the light and press the button twice quickly. Hold for 0.5 seconds to turn off.

UV light is turned on and off by holding the purple button on the side of the lamp for about 0.5 seconds.

Red laser is turned on and off by holding the red button on the side of the lamp for about 0.5 seconds.

Control buttons can be locked, to prevent it from turning on by itself, e.g. when transporting in luggage – to lock, turn off the light and simultaneously hold the red and purple buttons on the side of the light for 2 seconds. The light will then flash twice, indicating that it is locked. To unlock the button, hold both colored buttons again for 2 seconds.

Battery charge indication – with the light off, press the main button once briefly, which will light up the small LED in the button for three seconds. A green light indicates the battery is charged to 100-85%, green flashing indicates 85-50%, a red light indicates the battery is charged to 50-25% and red flashing indicates the battery is charged to less than 25%.

Overheating protection – if the temperature of the lamp exceeds 65°C, the power will automatically be reduced. As soon as the temperature drops below 65°C, the power will increase again.

Low battery warning – the lamp will gradually automatically switch to the lowest power mode and the indicator diode in the switch button will start flashing red.

Charging

• Connect the light to your computer, USB wall adapter, or USB car adapter via the USB-C cable. You can also use any mobile phone charger with a USB-C connector to charge it.
• During charging, the indicator LED in the button lights red, and when fully charged, it lights green.
• The battery used does not suffer from a memory effect, so the lamp can be recharged at any time.

Warning

• Do not disassemble sealed parts yourself, this will void the warranty.
• If the flashlight does not switch to higher power modes or does not light up, the battery is discharged - charge the flashlight.