Fenix WF26R rechargeable flashlight

Reliable work light Fenix WF26R offers a luminous flux of up to 3000 lumens and a range of 450 meters. Power is provided by the included 21700 Li-ion battery with a capacity of 5000 mAh, which is charged directly in the flashlight using included cradle with USB cable. The lamp simply clicks into the cradle when charging. The cradle is equipped with mounting holes, so it can be screwed to the wall, for example. The charging cable can be removed from the cradle and the lamp can be charged outside of it.

The Fenix WF26R has a total six lighting modes (including strobe and SOS) with lasting up to 44 hours. It uses to control dual tactical switch, which allows faster and more reliable control in crisis situations. For example, it can easily be switched directly into strobe mode.

Excellent technical parameters, waterproof and shockproof design make this lamp suitable for use in harsh outdoor conditions. It will be especially appreciated by members of the armed forces, firefighters, rescuers and mountain rescue services during their service. It will certainly find popularity among security agencies and building security.

All parameters of the luminaire (luminous flux, battery operating time, waterproofness, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard. 

Fenix WF26R flashlight parameters

• The premium Luminus SFT-70 LED with a lifespan of 50,000 hours is used.
• Six power modes: 3000 lumens (total 2.7 hours, after 1 minute reduction to 1000 lm) -> 1000 lumens (2.8 hours) -> 350 lumens (8.9 hours) -> 30 lumens (44 hours) – Strobe (3000 lumens) – SOS (100 lumens).
• Luminous flux and run times are measured with packaged Li-ion battery 21700 with a capacity of 5000 mAh.
• Electronics with digital constant power regulation and intelligent overheating protection.
• Made from hardened 6061-T6 aircraft aluminum, the light is shockproof to withstand a drop from a height of 1.5 meters.
• Protection against accidental battery insertion in reverse (reverse polarity).
• Durable surface – Type III hard anodized.
• Battery charge status indication on the lamp head.
• Removable steel clip for attaching to a pocket or belt.
• Charging cradle with magnetic charging, the cradle is powered by a standard USB cable (USB power supply not included).
• The cable can be removed and the lamp can be charged outside the cradle.
• The flashlight has a memory and always turns on in the last set mode (does not apply to flash modes).
• Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 meters for 4 hours)
• The reflector creates a well-focused light cone with afterglow 450 meters (52,888 cd).
• Lamp dimensions: 15.6 cm (length) x 4.04 cm (reflector diameter) x 2.66 cm (body diameter).
• Cradle dimensions: 7.67 x 4.37 x 4.7 cm.
• Weight 222 grams with battery.
• The flashlight comes with a Fenix ARB-L21-5000 V2.0 battery, a charging cradle with a USB charging cable, a wrist strap, and a spare O-ring.
• The WF26R model is supplied without a case. A basic textile case can be purchased separately.
• As optional original accessories, you can purchase the Fenix ALD-05 strap for using the light on a helmet, the Fenix bicycle mount, a USB power adapter, and a USB car adapter.

Using the Fenix WF26R flashlight

From the factory, there may be a battery inside the lamp insulating cap. Remove it from the battery before first use.

For on/off press the larger tactical button located at the end of the flashlight, to immediate activation button. If the light is on, you can press the secondary toggle button at any time during operation. switch between modes performance. For switching to strobe mode When the light is on, hold the toggle button for about 0.5 seconds, then press the button again to switch between strobe and SOS modes. To switch the light from off to strobe mode, press and hold the toggle button.

Charging – snap the lamp with the charging connector facing inside the cradle. Alternatively, if you have removed the charging cable from the cradle, attach the magnetic connector of the charging cable to the connector on the lamp. Connect the other end of the cable to a computer, or a USB adapter to the mains or a car adapter (adapters are not included). During charging, the side indicator lights up red. When fully charged, it lights up green. Charging a fully discharged battery takes about 3 hours using a 3A power supply. The lamp cannot be used while charging.

Intelligent overheating protection – Due to the fact that the lamp reaches a huge power of 3000 lumens, there is an increase in temperature. If the temperature exceeds 60°C, the power is automatically reduced. As soon as the temperature drops below 60°C, the highest power can be used again.

Battery charge status indication – the light always indicates the battery charge level three seconds after switching on. Green indicates sufficient charge level (100% – 85%), green flashing 85% – 50%, steady red 50% – 25% and flashing red indicates a critically discharged battery (25% – 1%). If the battery is discharged, the light will gradually start to automatically switch to lower power modes.

Low battery warning – the lamp will gradually automatically switch to the lowest mode and then the indicator will continue to flash red.

Warning

• Do not disassemble the sealed part in the lamp head yourself, as this will void the warranty.
• Use only high-quality 21700 Li-ion batteries to avoid damaging the flashlight, for example due to battery leakage.
• If the protective rubber rings appear damaged after a long period of use, replace them.
• If the light is flickering, not switching to a higher power or not turning on, it could be for one of the following reasons:
  • The battery is dead, charge it.
  • The contacts inside the lamp are dirty - clean them with a cotton swab dipped in alcohol.
  • The lamp end is loose, tighten it.