Fenix WF30RE 2025 ATEX

Professional rechargeable flashlight Fenix WF30RE is equipped with ATEX/IECex certification for use in explosive atmosphere. The lamp is powered by a specially modified Li-ion battery ARB-L21-3000Ex with a capacity of 3000 mAh and provides a luminous flux of up to 300 lumens with afterglow 149 meters. The battery is recharged directly in the lamp via USB-C connector. The body of the lamp is made of aircraft aluminum with high durability and impact resistance. The lamp is designed especially for firefighters and rescuers, it is also suitable as a work lamp for industrial operations with the possibility of explosive dust and gases. These include chemical plants, refineries, textile plants, paper mills, mills, metallurgical plants, power plants and other operations.

Certificates:

• Usable in zones 1-2 of explosive gases and zones 21-22 of explosive dust.
• Full text of certificates:
• IECEx: IECEx TUR 18.0042X:
  • Ex ib IIC T4 Gb
  • Ex ib IIIC T130°C Db
• ATEX: TÜV 18 ATEX 8252X:
  • II 2G Ex ib IIC T4 Gb
  • II 2D Ex ib IIIC T130°C Db
• The luminaire also holds CSA, NEPSI and GRGT certificates.

Parameters of the ATEX work lamp WF30RE:

• A powerful Cree XP-G3 LED with a neutral light shade and a lifespan of 50,000 hours is used.
• Five power modes: 300 lumens (7.3 hours) -> 100 lumens (22.8 hours) -> 30 lumens (68 hours) -> 5 lumens (313.3 hours) -> SOS (30 lumens).
• Uses special Li-ion battery Fenix ARB-L21-3000Ex with a capacity of 3000 mAh. This is a modified type certified for explosive environments.
• The battery is recharged directly in the lamp via a modern USB-C connector.
• The electronics are equipped with a protective function against excessive battery discharge; when the voltage drops below a certain limit, it automatically switches to a lower power mode.
• The flashlight has a memory and can be turned on in the last set mode, except for emergency modes (Eco and SOS).
• Battery charge status indication.
• Made from hardened aircraft grade A6061-T6 aluminum.
• Durable, scratch-resistant surface – Type III hard anodized.
• Shockproof to a drop from a height of 1 meter.
• Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 meters for 30 minutes).
• Textured aluminum reflector for a perfect light cone with afterglow 149 meters (5572 cd).
• Dimensions 15.17 cm (length) x 3.4 cm (head diameter) x 2.8 cm (body diameter).
• Weight 218 grams (including battery).
• The package includes: Fenix WF30RE flashlight, Fenix ARB-L21-3000Ex battery, USB charging adapter, USB-C charging cable, EU Declaration of Conformity, replacement O-ring, hand strap, user manual, warranty card.
• The lamp can be purchased with the Fenix ALD-05 strap for using the lamp on a helmet.

Control:

With the lamp off press and hold the switch for 0.5 seconds to switch to the last used normal power mode (General mode). With the light off, press the switch twice quickly to switch to the 5 lumen emergency mode (Extreme mode). You can switch power modes at any time during operation by pressing the side button within the selected mode group. With the light on, press and hold the switch for 0.5 seconds to turn off.

Battery charge status indication – press the flashlight button (with the flashlight off). If the indicator diode is green, the battery is charged to more than 85 %. Green flashing means 50-85 % capacity. If it is red, it is charged to 25-50 %. Red flashing means that less than 25 % battery capacity remains.

Low battery warning – the lamp will gradually automatically switch to the lowest mode and the indicator in the button will start flashing red.

Charging – Flip open the dust cover and plug the USB-C charging cable into the charging port. Replace the dust cover when charging is complete. The indicator in the button lights red while charging. It lights green when fully charged. Do not charge the flashlight in an explosive environment. When charging, use the included USB charging adapter to ensure safety.

To replace the battery, unscrew the lamp end using an 8 mm Allen key. Never replace the battery in an explosive environment.

Warning

• Perform all service work, charging and battery replacement outside of an explosive environment!
• Use only a manufacturer-certified Fenix battery.
• If the sealing rubber ring on the thread of the lamp cap becomes damaged, replace it with the spare one from the lamp packaging.
• If the light is flashing, not switching to higher power modes, or not turning on, it could be for one of the following reasons:
  • The battery is discharged, charge or replace it.

Warranty

Five-year warranty on the lamp, two-year warranty on the battery.