Fenix E03R V2.0 GE Rechargeable Flashlight – Red

Fenix E03R V2.0 is the successor to the successful miniature rechargeable flashlight, which can be carried on your keys or in your handbag. Despite minimum size and weight only 30 grams offers a high luminous flux of up to 500 lumens (ANSI). The light cone evenly illuminates a wide area up to a distance 90 meters. The integrated Li-pol battery with a capacity of 400 mAh is used for power supply, which is charged via a modern USB-C connector on the side of the lamp. There are a total of four white light modes and two modes red light with maximum up to 30 hours of battery life in the lowest mode. A unique innovation is the so-called. Breathing light, a pulsating light around the switch button with a power of 1 lumen, which you can use for discreet signaling or identification of the location of the lamp and thus a bunch of keys. The lamp is supplied with a ring for hanging on keys, so you can easily carry it with you at all times. The battery charge indicator in the button is also practical. With this useful gift you will always make someone happy.

All parameters of the luminaire (luminous flux, battery operating time, waterproofness, impact resistance and afterglow) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix E03R V2.0 flashlight parameters

• Two white MATCH CA18 LEDs and a red Everlight 2835 LED are used. All with a lifespan of 50,000 hours.
• Four white light modes: 500 lumens (1.3 hours) -> 150 lumens (2 hours) -> 30 lumens (6.5 hours) -> 5 lumens (30 hours).
• Two red light modes: 5 lumens -> red flashing (5 lumens).
• Pulsating light around the power button with a power of 1 lumen (Breathing light).
• The flashlight is powered by a built-in rechargeable lithium-polymer battery with a capacity of 400 mAh.
• Battery charge status indication in the button.
• Charging via modern USB-C connector.
• Memory for the last set white light power mode.
• Intelligent overheating protection.
• CNC milled aluminum alloy body with Type III hard anodized anti-scratch finish.
• Dimensions 5.25 cm (length) x 2.6 cm (width) x 1.3 cm (height).
• Luminous range 90 meters (2082 cd).
• Weight 30 grams (including battery).
• Waterproof according to IP66 standard (sprayed with strong jets of water from all directions).
• Shockproof against a drop from a height of 1 meter.
• The package includes a key ring and a USB-C charging cable.
• It is possible to purchase a USB-C cable, a colored USB-C cable, or a micro-USB to USB-C adapter.

Use

On turning on or off Hold down the side button for about 0.5 seconds. On turning on the red light Press and hold the button for 1.2 seconds. You can change the power modes at any time during operation. to switch by pressing the side button. For Turning on the Breathing light Turn off the light and press the button twice quickly.

The control button can be locked, to prevent it from turning on by itself, e.g. when transporting in luggage – to lock, turn off the light and hold the button for 3 seconds. The light will then flash twice, indicating that it is locked. To unlock, hold the button again for 3 seconds.

Battery charge indication – with the light off, press the button once briefly, which will light up the small LED in the button for three seconds. A green light indicates the battery is charged to 100-85%, a green flash indicates 85-50%, a red light indicates the battery is charged to 50-25%, and a red flash indicates the battery is charged to less than 25%.

Overheating protection – if the temperature of the lamp exceeds 60°C, the power will be automatically reduced. Once the temperature drops below 60°C, the highest power can be used again.

Low battery warning – the lamp will gradually automatically switch to the lowest power mode and the indicator diode in the switch button will start flashing red.

Charging

• Lift the rubber cover of the USB-C connector and connect the flashlight to a computer, USB power adapter or USB car adapter with the USB-C cable. Alternatively, you can use any mobile phone charger with a USB-C connector to charge.
• During charging, the indicator LED in the button lights red, and when fully charged, it lights green.
• Charging a fully discharged battery takes approximately 2 hours.
• The Li-pol battery used does not suffer from memory effect, so the flashlight can be recharged at any time.
• Seal the USB connector cover tightly after each charge.

Warning

• Do not disassemble sealed parts yourself, this will void the warranty.
• In humid environments, make sure the USB-C connector cap is properly seated in the lamp.
• If the flashlight does not switch to higher power modes or does not light up, the battery is discharged - charge the flashlight.